Plan a ChargePoint Home Flex Installation
Home Flex installation starts with the exact connector and power-supply version you own or intend to buy. Review that model's installation requirements, parking reach and commissioning conditions before deciding whether to retain a receptacle or plan a hardwired connection.
Free estimates for defined installation work. Paid diagnostics are explained before approval.
Match the CPH50 version to the installation.
Home Flex is available with different vehicle connections and supply configurations. Check the full model and package rather than buying from the product-family name alone. A matching plug shape does not establish that an existing receptacle, circuit or panel is suitable for sustained EV charging.
| Configuration | Planning limit | What to confirm |
|---|---|---|
| Permitted plug-in version | 32 A or 40 A charging, according to the inspected FAQ | Exact receptacle, circuit, protection and unit instructions |
| Hardwired version | Up to 50 A on a suitable designed installation | Vehicle limit and the current model-specific circuit table |
| Two Home Flex stations | A separate dedicated circuit for each | Total household capacity and both installation scopes |
Sources: ChargePoint: Home charging / Home Flex · ChargePoint: Home Flex installation FAQ
Confirm the installer requirement before purchase.
ChargePoint’s May 2026 installation guide includes a certified-installer condition in its warranty language. Its broader installation FAQ says a licensed electrician can install the equipment. These statements should be clarified with ChargePoint for your exact product and warranty.
Ask us to review the model and project first. This page is a planning guide and does not claim that Mister Safety holds a ChargePoint certification or that every proposed installation qualifies for the manufacturer’s warranty.
Sources: ChargePoint: Home Flex installation FAQ · ChargePoint: Home Flex Installation Guide, US J1772 and NACS
A home app does not make a shared circuit.
Home Flex offers connected home-charging controls, but ChargePoint expressly requires a dedicated circuit for each station. Do not plan two Home Flex units on one circuit simply because both appear in an app.
For two vehicles, first compare the daily energy required and when each car needs to leave. One charging point used sequentially may fit some routines; two independent installations require assessment of their combined demand.
Hardwire, receptacle and required protection.
Plug-in configurations have lower limits than the product’s highest hardwired setting. Built-in protection does not erase required receptacle GFCI protection. If documents seem to conflict, the installer must resolve the exact equipment instructions and locally applicable requirements; bypassing required protection is not an answer.
An existing charger that repeatedly trips needs diagnosis. Bring the symptoms and visible model information; do not repeatedly reset it or open the equipment to investigate.
Sources: ChargePoint: Home Flex installation FAQ · ChargePoint: Home Flex Installation Guide, US J1772 and NACS · Leviton Captain Code: 2020 NEC 625.54 GFCI protection
Prepare for everyday charging.
Consider cable reach from your normal parking spot, outdoor exposure, Wi-Fi at the location and who will manage the account. Confirm the installed current limit and complete commissioning before treating the job as finished. Include any receptacle replacement, mounting changes, permits and warranty qualification in the written scope.
Sources: ChargePoint: Home charging / Home Flex · ChargePoint: Home Flex installation FAQ
Questions about chargepoint home flex
Can the plug-in version deliver 48 A or 50 A?
Not under the inspected Home Flex FAQ. Its plug-in arrangements use 32 A or 40 A settings; other settings require a suitable hardwired installation.
Can two Home Flex units share one circuit?
No. ChargePoint states that each station requires its own dedicated circuit.
Will any licensed installation qualify for the equipment warranty?
Confirm the current warranty with ChargePoint. The May 2026 guide includes installer-certification wording that differs from the broader FAQ.
Let’s plan your home charging.
Tell us your Home Flex model and whether you already have a receptacle.
Clear scope before paid work.
A free estimate prices defined installation or upgrade work. Investigating an unexplained fault is paid diagnostic work; the charge is explained and approved before troubleshooting.
Existing charger tripping? Ask about diagnostics.Based in Zephyrhills and the Tampa Bay area. We confirm availability for your Florida service address and project.
Our office answers 24/7. Arrival windows describe expected arrival, not a completion guarantee. View scheduling and fee details.
Read our current warranty terms. Manufacturer equipment coverage and qualifying installation workmanship are separate.
Research checked September 10, 2026. Exact model instructions, locally adopted requirements and the assessed property determine the installation. Product documentation can change.
Sources and further reading
- ChargePoint — Home charging / Home Flex Undated current product page
- ChargePoint — Home Flex installation FAQ Undated support page
- ChargePoint — Home Flex Installation Guide, US J1772 and NACS Revision history: May 2026; prior November 2025 update
- Leviton Captain Code — 2020 NEC 625.54 GFCI protection 2020 NEC edition; webpage undated